# Acer FA200 500 GB: A Budget PCIe 4.0 QLC NVMe (2026)

The Acer FA200 500 GB is Acer's budget PCIe 4.0 NVMe, pairing a DRAM-less Maxiotech MAP1602A controller with YMTC 232-layer QLC NAND at the smallest and slowest capacity in the FA200 family.

Quick answer: Buy the Acer FA200 500 GB as a budget boot and everyday drive in a PCIe 4.0 desktop or laptop where the low asking price matters more than peak write speed, and where the single-sided layout and graphene pad keep installation simple. Skip it for a primary game library on a tight budget, for a video editing scratch disk, or for any workload with long sustained writes, where the QLC NAND's drop past the SLC cache and the 500 GB's halved write speed will both be felt. The stronger alternative in the same tier is a TLC drive like the WD Blue SN580 or Team Group MP44L 500 GB, which holds sustained writes better for similar money, or stepping up to the 1 TB FA200, which doubles write speed to 6,200 MB/s and endurance to 500 TBW. The verdict on the FA200 500 GB is a competent, no-frills QLC boot drive whose main draw is price rather than any performance distinction.

## Specifications

| Specification | Value |
| --- | --- |
| Capacity | 500 GB |
| Interface | M.2 4.0 x 4 |
| Controller | Maxiotech MAP1602A 4 channel |
| Memory type | YMTC 232-L, QLC |
| DRAM cache | HMB |
| Sequential read | 6300 MB/s |
| Sequential write | 3100 MB/s |
| Random read IOPS | 600000 |
| Random write IOPS | 600000 |
| Endurance | 250 TBW |
| MTBF | 1500000 |
| Warranty | 5 years |

## Performance

On the 500 GB FA200, Acer rates sequential reads at 6,300 MB/s and sequential writes at 3,100 MB/s over a PCIe 4.0 x4 link, with random performance up to 600K IOPS on both read and write. Those are competent budget PCIe 4.0 numbers on reads, but the write figure is the telling one: at 3,100 MB/s the 500 GB is roughly half the 6,200 MB/s write speed of the 1 TB and 2 TB flagships, the usual penalty a smaller-capacity QLC drive pays for having fewer parallel NAND dies and a smaller SLC cache.

For everyday desktop use, boot times, application launches and game loading, the drive feels responsive and the read bandwidth is more than enough; game load times are typically bounded by the CPU and asset decompression rather than storage, so the gap to a faster PCIe 4.0 drive is small in practice. The honest caveat is QLC behaviour under sustained writes: once the SLC cache fills, writes settle to the native YMTC QLC rate, which can drop well below 1,000 MB/s and is most visible on the 500 GB because it carries the smallest cache in the line. That makes the 500 GB a poor fit for a video scratch disk or a constant large-file ingest workload, where a TLC drive such as the WD Blue SN580 or Team Group MP44L holds its writes far better. No dedicated independent benchmark of the 500 GB exists at research time, so the figures here are manufacturer-rated, and the reviewed 2 TB and 4 TB models confirm the platform behaves as described.

## Endurance, TBW & Warranty

Acer covers the FA200 500 GB with a five-year limited warranty, ending early if the 250 TBW endurance rating is exceeded, whichever comes first. The 250 TBW figure is the entry point of a family that climbs through 500 TBW on the 1 TB, 1,000 TBW on the 2 TB and 2,000 TBW on the 4 TB, scaling with capacity under the YMTC QLC endurance profile. At a typical consumer workload of around 20 GB of writes per day, the 500 GB would need more than 34 years to wear out the NAND, so in practice the warranty term expires long before the flash does; even a heavier 50 GB-per-day routine still clears 13 years. Acer rates the drive at up to 1.5 million hours MTBF, but that figure is a population-reliability statistic describing expected failures across a large fleet, not a lifespan guarantee for any single unit.

## Pros and Cons

**Pros:**

- 6,300 MB/s sequential reads on PCIe 4.0
- 600K random read and write IOPS rated
- Single-sided M.2 2280 fits laptops and PS5
- Maxiotech MAP1602A with YMTC 232-layer NAND
- Graphene thermal pad for cooling
- Five-year warranty, TBW-limited
**Cons:**

- Write speed drops to 3,100 MB/s on the 500 GB
- QLC NAND slows sharply past the SLC cache
- 250 TBW is the lowest endurance in the line
- No DRAM cache, relies on host HMB
- No metal heatsink, graphene pad only
- 500 GB has no dedicated independent reviews


## Verdict

Buy the Acer FA200 500 GB as a budget boot and everyday drive in a PCIe 4.0 desktop or laptop where the low asking price matters more than peak write speed, and where the single-sided layout and graphene pad keep installation simple. Skip it for a primary game library on a tight budget, for a video editing scratch disk, or for any workload with long sustained writes, where the QLC NAND's drop past the SLC cache and the 500 GB's halved write speed will both be felt. The stronger alternative in the same tier is a TLC drive like the WD Blue SN580 or Team Group MP44L 500 GB, which holds sustained writes better for similar money, or stepping up to the 1 TB FA200, which doubles write speed to 6,200 MB/s and endurance to 500 TBW. The verdict on the FA200 500 GB is a competent, no-frills QLC boot drive whose main draw is price rather than any performance distinction.

## Frequently Asked Questions

### Is the Acer FA200 500 GB good for gaming?

It is adequate for gaming, though it is not the drive a performance-focused builder would pick first. The Acer FA200 500 GB hits 6,300 MB/s sequential reads and 600K random IOPS, which is plenty of bandwidth for game loading, and the PCIe 4.0 x4 link keeps it well clear of any SATA or PCIe 3.0 bottleneck. In practice, game load times are usually bounded by the CPU and asset decompression rather than storage, so the gap between this drive and a faster PCIe 4.0 model is small in most titles. The real limitation is capacity rather than speed: 500 GB holds only a handful of modern AAA games, so a larger drive is the better gaming investment.

### Does the Acer FA200 500 GB work in a PS5?

It does, with the usual PCIe 4.0 caveat. Sony recommends an M.2 NVMe SSD with at least 5,500 MB/s sequential reads and dimensions within 110 by 25 by 11.25 millimetres including a heatsink, and the Acer FA200 500 GB clears both: it reads at 6,300 MB/s and uses a single-sided M.2 2280 layout with a thin graphene thermal pad rather than a tall metal heatsink. The console's expansion slot is PCIe 4.0, so the drive runs at full speed rather than being capped. The honest constraint is again capacity, since 500 GB fills quickly when modern games regularly pass 100 GB each, so a 1 TB or larger drive is the more sensible PS5 upgrade.

### What is the TBW endurance of the Acer FA200 500 GB?

The Acer FA200 500 GB carries a 250 TBW endurance rating, the entry point of a family that scales to 500 TBW on the 1 TB, 1,000 TBW on the 2 TB and 2,000 TBW on the 4 TB. At a typical consumer workload of around 20 GB of writes per day, the drive would need more than 34 years to exhaust the NAND, so the five-year warranty term expires long before the flash wears out. The 250 TBW figure matters most for buyers running heavy write workloads like video capture or large file transfers every day, where a larger-capacity drive with a higher TBW rating would be the safer long-term choice.

### Does the Acer FA200 have a DRAM cache?

It does not. The Acer FA200 uses a DRAM-less design built around Maxiotech's MAP1602A four-channel controller, and instead of a discrete DRAM chip it relies on the Host Memory Buffer (HMB) protocol to borrow a small slice of the system's RAM for its flash-mapping tables. This is a common cost-saving choice in budget PCIe 4.0 drives and has little practical impact on everyday reads, boot times and game loading. The trade-off shows up under heavy sustained random writes, where a DRAM-less drive can fall behind a DRAM-equipped model; for a 500 GB boot and everyday drive the HMB design is fine, but it is part of why the FA200 sits in the budget tier.

### Is the Acer FA200 500 GB slower than the larger capacities?

Yes, noticeably so on writes. Acer rates the 500 GB at 6,300 MB/s sequential reads and 3,100 MB/s writes, while the 1 TB and 2 TB flagships both reach 7,200 MB/s reads and 6,200 MB/s writes, and the 4 TB is rated at 7,100 and 6,100 MB/s. The 500 GB also carries the lowest random IOPS in the line at 600K read and write, against up to 1,000K read on the larger capacities. This is the standard pattern for QLC drives: fewer NAND dies in parallel on the smaller capacity means lower write speed and a smaller SLC cache. Buyers who need the full headline speed should step up to the 1 TB or 2 TB FA200.

### Does the Acer FA200 500 GB need a heatsink?

For everyday use the included graphene thermal pad is enough, and no extra heatsink is required. The Acer FA200 500 GB ships with that graphene pad rather than a metal heatsink, and the single-sided M.2 2280 layout keeps the drive thin enough to fit under most motherboard heatsinks or into a laptop slot. Under sustained heavy writes the QLC NAND and DRAM-less controller can warm up and the drive will thermal-throttle to protect itself, which shows up as a drop in write speed. A motherboard M.2 heatsink helps if one is available, but for a boot and everyday drive the graphene pad handles typical workloads without issue.

### What controller and NAND does the Acer FA200 use?

The Acer FA200 uses Maxiotech's MAP1602A four-channel NVMe controller paired with YMTC 232-layer QLC NAND flash, a DRAM-less combination that runs over a PCIe 4.0 x4 link. The drive is actually manufactured by BIWIN under the Acer brand, a common arrangement in which BIWIN acts as the OEM. The Maxiotech MAP1602A is a value-tier PCIe 4.0 controller, and the YMTC 232-layer QLC is the same NAND family used across many budget drives, trading raw sustained write speed and endurance per gigabyte for low cost and high density. This controller-plus-NAND recipe is the main thing that defines the FA200's performance profile across all four capacities.

---

Last updated: 2026-07-13. Source: https://ssdrive.net/acer-fa200-500-gb