MyDigitalSSD BPX Pro 256Gb NVMe specs
How fast is the BPX Pro (256Gb) produced by MyDigitalSSD and extra specs read below in our article.
MyDigitalSSD BPX Pro 256Gb works on Phison PS5012-E12 controller. This internal SSD has DRAM SK Hynix DDR3 or DDR4 to keep a map of where data is located on the NVMe SSD. The BPX Pro comes equipped with Toshiba TLC flash memory. Internal SSD is offered also in three capacities, including 2 Tb, 512 Gb and 1 Tb volume sizes.
✅ Storage Comparisons:
🚀 Performance and benchmarks
Drive works on PCIe M.2 3.0 x 4 interface with maximum write speeds 3100 Mbps, and maximum read speeds 3400 MB/s.
🖥️ Endurance and warranty
Manufacturer provide 5 years warranty period limited by endurance 380 TBW.
📊 Specs
Category | Value |
Capacity | 256 Gb |
Interface | M.2 3.0 x 4 |
Controller | Phison PS5012-E12 |
Memory type | Toshiba TLC |
DRAM | SK Hynix DDR3 or DDR4 |
Read speed (Mb/s) | 3400 |
Write speed (Mb/s) | 3100 |
Read IOPS | n/a |
Write IOPS | n/a |
Endurance (TBW) | 380 |
MTBF (million hours) | n/a |
Warranty (years) | 5 |
Conclusion
BPX Pro (256Gb) produced by MyDigitalSSD use previous bus standard that is significantly slower than PCIe 4.0. The write speed is 3100 Mb/s, that is okay for this expansion standard. The NVMe provide possibility to write 380 TBW, that is good in comparison with closest rivals. Weighing all these factors, MyDigitalSSD BPX Pro 256Gb is a well-balanced SSD.
+ Pros
- Good writing speed
- Endurance
- Cons
- PCIe 3.0
- Capacity
🛒 Buy this or similar SSD Storage:
✨ Video Review
NVMe vs Sata iii - How much faster is it? - MyDigitalSSD BPX Review