Team Force Cardea A440 Pro 1Tb SSD detailed specs

Posted on November 18, 2022 by Raymond Chen

Should you buy Team Force Cardea A440 Pro 1Tb and another details read below here.

Team Force Cardea A440 Pro 1Tb SSD detailed specs

Team Force Cardea A440 Pro 1Tb works on Phison PS5018-E18. The SSD write a data location map on DRAM SK Hynix DDR4 to launch a programs without delays. The Cardea A440 Pro comes equipped with Micron 3D TLC memory. This drive is offered also in 2 Tb and 4 Tb capacities.

Performance and benchmarks

Internal SSD works on PCIe M.2 4.0 x 4 interface with read speeds 7400 MB/s, and write speeds equals to 7000 MB/s. It also has IOPS 1000000 on writing and 1000000 on reading operations.

Endurance and warranty

Manufacturer provide 5 years of warranty.

Specs

Category Value
Capacity 1 Tb
Interface M.2 4.0 x 4
Controller Phison PS5018-E18
Memory type Micron 3D TLC
DRAM SK Hynix DDR4
Read speed (Mb/s) 7400
Write speed (Mb/s) 7000
Read IOPS 1000000
Write IOPS 1000000
Endurance (TBW) n/a
MTBF (million hours) n/a
Warranty (years) 5

Conclusion

Cardea A440 Pro (1Tb) produced by Team Force may work on PCIe 4.0 that is significantly faster than previous bus standard. The maximum write speed is 7000 Mb/s, that is faster than has most of rivals. On balance, our editor highly advise to buy Team Force Cardea A440 Pro 1Tb for your PC.

+ Pros

  • Excellent writing speed
  • PCIe 4.0
  • Capacity

- Cons

  • None

Buy this or similar SSD:

Video Review

TeamGroup T-Force Cardea A440 SSD Review & Benchmark - Bringing it's A Game

FAQ

The Team Force Cardea A440 Pro has SK Hynix DDR4. DRAM makes storage faster, but also more expensive.

The Team Force Cardea A440 Pro 1Tb due to the low density of memory chips able to last without further cooling systems. Some motherboards or laptops designed with additional cooling below or above the storage to improve performance during high loads.

The Team Force Cardea A440 Pro has sequential write speed 7000 Mb per second, maximum read speed 7400 Mb/s. It works on Phison PS5018-E18 controller and M.2 4.0 x 4 high-speed serial computer expansion bus standard. The NAND flash memory type is Micron 3D TLC.
There are no comments yet.
Your message is required.

Similar SSD:

Asgard AN4 Review

Asgard AN4

1 Tb / M.2 4.0 x 4

VisionTek Pro Review

VisionTek Pro

1 Tb / M.2 3.0 x 4

Goodram PX500 Review

Goodram PX500

1 Tb / PCIe 3.0 x 4

Kioxia XG6 Review

Kioxia XG6

1 Tb / M.2 3.0 x 4