Gigabyte Aorus Gen5 14000 4TB PCIe 5.0 NVMe SSD Review (2026)
The Gigabyte Aorus Gen5 14000 4 TB is the largest capacity of Gigabyte's flagship PCIe 5.0 lineup, pairing a Phison E26 controller with Micron 232-layer TLC and a 3,000 TBW endurance rating.

Controller & Memory
Inside the 4 TB Aorus Gen5 14000 sits the Phison PS5026-E26 controller, an eight-channel PCIe 5.0 design built on TSMC's 12 nm process, paired with Micron's 232-layer 3D TLC NAND. A 4 GB LPDDR4 DRAM buffer handles the flash translation layer, and the drive speaks NVMe 2.0 over a PCIe 5.0 x4 link. The PCB is double-sided and the drive ships bare, so you must pair it with a motherboard heatsink, an active M.2 fan, or a dedicated aftermarket cooler, as Gigabyte explicitly states in its spec sheet.
This 4 TB model sits at the top of the lineup and its endurance reflects that, with a 3,000 TBW rating that more than doubles the 2 TB's 1,400 TBW and quadruples the 1 TB's 700 TBW. Sequential speeds are nearly identical to the 2 TB flagship at 14,100 MB/s reads and 12,600 MB/s writes, a hair below the 2 TB's 14,500 and 12,700 but well ahead of the 1 TB's reduced 13,600 and 10,200. For anyone building a large game library, a video scratch disk, or an AI training-data store on PCIe 5.0, the 4 TB is the capacity that combines top-tier bandwidth with serious write headroom.
The direct rivals at this tier are other first-wave PCIe 5.0 drives on the same E26 platform, namely the Crucial T705 and T700, the Corsair MP700 Pro, and the Inland TD510. Against Gen4 flagships like the Samsung 990 Pro and WD Black SN850X, the Aorus roughly doubles sequential bandwidth on paper, though for pure gaming the real-world gap is much narrower. Compatibility is limited to platforms with a physical PCIe 5.0 M.2 slot, which today means Intel 600-series and AMD 800-series chipsets, plus a handful of late 700-series boards.
Storage Comparisons:
Aorus Gen5 14000 Performance & Benchmarks
Gigabyte rates the 4 TB Aorus Gen5 14000 for up to 14,100 MB/s sequential reads and 12,600 MB/s sequential writes, within a hair of the PCIe 5.0 x4 interface ceiling and nearly matching the 2 TB flagship. Random performance is rated up to 1.5 million read IOPS and roughly 1.5 million write IOPS, in line with other E26 drives on the same Micron 232-layer TLC platform, though Gigabyte does not publish an official IOPS figure on its spec page. Those random numbers are best-case QD32 figures, not what a single-queue desktop workload will actually see.
Gigabyte Aorus Gen5 14000 4 TB vs M.2 5.0 peers
Switch between sequential throughput and random IOPS to see how this drive stacks up against other M.2 5.0 SSDs in our database. The highlighted bar is the drive on this page — click any other bar to open that drive.
- Corsair MP700 Pro XT 1 TB: 14,900 MB/s read, 14,200 MB/s write
- Corsair MP700 Pro XT 2 TB: 14,900 MB/s read, 14,500 MB/s write
- Corsair MP700 Pro XT 4 TB: 14,900 MB/s read, 14,400 MB/s write
- Crucial T710 1 TB: 14,900 MB/s read, 13,800 MB/s write
- Gigabyte Aorus Gen5 14000 4 TB (this drive): 14,100 MB/s read, 12,600 MB/s write
In practice, the headline sequential gain over PCIe 4.0 shows up most clearly in large-file transfers and synthetic benchmarks. For OS boot, application launches, and game load times, the delta against a fast Gen4 drive like the Samsung 990 Pro is usually small, often within margin of error, because most current game engines are not yet bandwidth-bound on storage. Where PCIe 5.0 starts to matter is DirectStorage-enabled titles, large video scratch disks, and workstation or AI workflows that move tens of gigabytes per pass. The 4 TB's larger SLC cache window also means longer sustained bursts before writes drop to native TLC rates, a real advantage on this capacity over the 1 TB.
Gigabyte Aorus Gen5 14000 vs Competitors
See how the Aorus Gen5 14000 stacks up against other M.2 5.0 drives in our database:
Compare with rival drives:
Endurance, TBW & Warranty
Gigabyte covers the Aorus Gen5 14000 4 TB with a limited 5-year warranty, terminating at 3,000 TBW, whichever comes first. The TBW rating is evaluated under JEDEC workload standards, and the drive's SMART Percentage Used attribute (SMART ID 05) is what Gigabyte's SSD Toolbox watches to determine warranty status; hitting 100 percent means out of warranty. At a typical mixed consumer workload of roughly 20 to 50 GB of writes per day, 3,000 TBW translates into over a century of theoretical headroom, so for any realistic use the calendar term rather than the endurance ceiling is what will expire first. The rated MTBF is 1.6 million hours, a population statistic rather than a per-drive guarantee. The warranty is handled direct through Gigabyte, not the retailer, and the drive must be used with a motherboard heatsink to stay within spec.
Gigabyte Aorus Gen5 14000 4 TB Specifications
| Category | Value |
|---|---|
| Capacity [?] | 4 TB |
| Interface [?] | M.2 5.0 |
| Controller [?] | Phison PS5026-E26 8 Channel |
| Memory type [?] | Micron 232-L TLC |
| DRAM [?] | Yes |
| Read speed (MB/s) [?] | 14100 |
| Write speed (MB/s) [?] | 12600 |
| Read IOPS [?] | 1500000 |
| Write IOPS [?] | 1500000 |
| Endurance (TBW) [?] | 3000 |
| MTBF (million hours) [?] | 2000000 |
| Warranty (years) [?] | 5 |
Verdict: Is the Aorus Gen5 14000 Worth It in 2026?
The 4 TB Aorus Gen5 14000 is the capacity to buy if you need serious write headroom alongside flagship PCIe 5.0 bandwidth, with a 3,000 TBW rating that comfortably handles heavy video, AI, or content workloads for years. It makes sense for an enthusiast or professional building a fresh PCIe 5.0 platform who wants a single large drive for game library plus scratch disk without compromise. Skip it if your motherboard only has PCIe 4.0 M.2 slots, or if your workload is mostly OS and everyday gaming, where a 2 TB Gen4 flagship like the Samsung 990 Pro costs far less and delivers nearly identical real-world feel. The Crucial T705 and Corsair MP700 Pro 4 TB are the closest peers on the same E26 platform and are worth cross-shopping on price. Overall, this is a flagship-class Gen5 drive that earns its premium only on a true PCIe 5.0 build with heavy write demands.
+ Pros
- 14,100 MB/s sequential reads on PCIe 5.0
- 3,000 TBW endurance, top of the lineup
- 4 GB LPDDR4 DRAM cache
- Phison E26 with Micron 232-layer TLC
- 5-year warranty with generous TBW
- Large SLC cache window for sustained writes
- Cons
- High cost per GB at the 4 TB capacity
- Requires a motherboard heatsink, not included
- Needs a PCIe 5.0 platform to be useful
- Gen5 price premium over comparable Gen4
- Double-sided PCB may limit some laptop slots
Buy this or similar SSD Storage:
Video Review
Gigabyte Aorus Gen5 14000 SSD 2TB M.2 NVMe PCIe 5.0 x4 specifications (1TB, 2TB, 4TB)