Gigabyte Aorus 10000 1Tb NVMe specs

Posted on December 23, 2022 by Raymond Chen

Gigabyte's Aorus 10000 works on PCIe M.2 5.0. Read below about this SSD here.

Gigabyte's 1Tb Aorus 10000 SSD works on Phison PS5026-E26. The SSD write a data location map on DRAM LPDDR4 to launch a programs without delays. The Aorus 10000 comes equipped with 3D TLC memory. This NVMe besides, available in 4 Tb and 2 Tb capacities.

Performance and benchmarks

Internal SSD works on PCIe M.2 5.0 computer expansion bus standard with read speeds 12500 MB/s, and maximum write speeds 10000 Mbps. Aorus 10000 has IOPS 1300000 on writing and 1300000 on reading operations per second.

Endurance and warranty

Specs

Category	Value
Capacity	1 Tb
Interface	M.2 5.0
Controller	Phison PS5026-E26
Memory type	3D TLC
DRAM	LPDDR4
Read speed (Mb/s)	12500
Write speed (Mb/s)	10000
Read IOPS	1300000
Write IOPS	1300000
Endurance (TBW)	n/a
MTBF (million hours)	n/a
Warranty (years)	n/a

Conclusion

The maximum write speed is 10000 Mbps, that is faster than has most of rivals. Weighing all these factors, our site strongly recommend to buy Gigabyte Aorus 10000 1Tb for your PC.

+ Pros

Excellent writing speed
PCIe 5.0
Capacity

- Cons

None

Buy this or similar SSD:

Video Review

Building the $1,000,000 Computer

FAQ

The Gigabyte Aorus 10000 has LPDDR4. Dynamic Random-Access Memory makes storage faster, but more expensive.

The Gigabyte Aorus 10000 due to the low density of memory chips may function without extra cooling systems. Some motherboards or laptops already has additional cooling below or above the SSD for better performance during high loads.

The Gigabyte Aorus 10000 1Tb has write speed 10000 Mbps, read speed 12500 Mbps. It operate on Phison PS5026-E26 controller and M.2 5.0 interface standard. The NAND memory type is 3D TLC.