ADATA XPG SX8200 Pro 1Tb NVMe SSD tech review

Posted on November 07, 2022 by Raymond Chen

ADATA's XPG SX8200 Pro internal SSD use PCIe M.2 3.0 x 4. Read below about this SSD on our page.

ADATA XPG SX8200 Pro 1Tb NVMe SSD tech review

ADATA's 1Tb XPG SX8200 Pro NVMe use Silicon Motion SM2262EN controller. The NVMe storing a data location map on Dynamic-Random Access Memory NANYA 256MB DDR3L to launch a programs without delays. The XPG SX8200 Pro comes equipped with n/a memory. This drive is offered also in three capacities, including 2 Tb, 256 Gb and 512 Gb.

Performance and benchmarks

SSD use PCIe M.2 3.0 x 4 computer expansion bus standard with maximum read speeds 3500 MB/s, and maximum write speeds equals to 3000 Mbps. This model has IOPS 390000 on reading and 380000 on writing operations.

Endurance and warranty

Manufacturer provide 5 years warranty for this product. The XPG SX8200 Pro has 2 million hours mean time between failure.


Category Value
Capacity 1 Tb
Interface M.2 3.0 x 4
Controller Silicon Motion SM2262EN
Memory type n/a
Read speed (Mb/s) 3500
Write speed (Mb/s) 3000
Read IOPS 390000
Write IOPS 380000
Endurance (TBW) n/a
MTBF (million hours) 2
Warranty (years) 5


XPG SX8200 Pro (1Tb) produced by ADATA may work on PCIe Gen3 that is twice slower than PCIe 4. The maximum write speed is 3000 Mbps, that is okay for this expansion standard. On balance, our editor strongly recommend to purchase ADATA XPG SX8200 Pro 1Tb for your PC.

+ Pros

  • Good writing speed
  • Capacity

- Cons

  • PCIe 3.0

Buy this or similar SSD:

Video Review

NVME Wars: Adata XPG SX8200 vs Samsung 970 Pro/EVO Plus


The ADATA XPG SX8200 Pro has NANYA 256MB DDR3L. Dynamic random-access memory (DRAM) makes SSD work faster, but also more expensive.

The XPG SX8200 Pro 1Tb due to the low density of memory chips able to operate without additional cooling systems. Some motherboards or laptops from the factory has thermal pads above and below the drive to enhance performance during heavy loads.

The ADATA XPG SX8200 Pro has write speed 3000 Mbps, maximum read speed 3500 Mb per second. NVMe operate on Silicon Motion SM2262EN controller and M.2 3.0 x 4 interface standard.
There are no comments yet.
Your message is required.