HP FX 900 Pro 1Tb SSD specs

Posted on December 17, 2022 by Raymond Chen

Should you buy HP FX 900 Pro 1Tb and another specs read below on this site.

HP's 1Tb FX 900 Pro SSD use Innogrit IG5236 controller. The NVMe write a data location map on Dynamic-Random Access Memory DDR4 to launch a programs without delays. The FX 900 Pro comes equipped with Micron TLC memory. Internal SSD is offered also in 512 Gb and 2 Tb capacities.

Performance and benchmarks

This NVMe works on PCIe M.2 4.0 x 4 interface with maximum write speeds 6800 MB/s, and read speeds 7400 MB/s. FX 900 Pro has input/output performance 1300000 on reading and 1100000 on writing operations.

Endurance and warranty

Specs

Category	Value
Capacity	1 Tb
Interface	M.2 4.0 x 4
Controller	Innogrit IG5236
Memory type	Micron TLC
DRAM	DDR4
Read speed (Mb/s)	7400
Write speed (Mb/s)	6800
Read IOPS	1300000
Write IOPS	1100000
Endurance (TBW)	1200
MTBF (million hours)	n/a
Warranty (years)	n/a

Conclusion

HP FX 900 Pro 1Tb may work on PCIe 4.0 that is undoubtedly faster than previous bus standard. The write speed is 6800 Mbps, that is faster than has most of competitors. The drive has endurance 1200 TBW, that is good compared to closest competitors. On balance, we advise to buy HP FX 900 Pro 1Tb for your PC.

+ Pros

Excellent writing speed
PCIe 4.0
Capacity
Endurance

- Cons

None

Buy this or similar SSD:

Video Review

Una SSD ULTRA RÁPIDA para PC | Laptop | PlayStation 5 - Review HP FX900 PRO Nvme 1.4

FAQ

The HP FX 900 Pro has DDR4. Dynamic Random-Access Memory makes storage work faster, but more expensive.

The FX 900 Pro 1Tb due to the low density of memory chips may work without further cooling systems. Some motherboards or laptops already has thermal pads below and above the drive to improve productivity during heavy loads.

The HP FX 900 Pro 1Tb has write speed 6800 Mb per second, maximum read speed 7400 Mbps. It operate on Innogrit IG5236 controller and M.2 4.0 x 4 interface standard. The NAND memory type is Micron TLC.