Lexar NQ790 2TB NVMe SSD specifications (2026)

Posted on by Raymond Chen

Quick answer

NQ790 (2TB) produced by Lexar support PCIe Gen4 that is significantly faster than previous bus standard.

Read: 7400 MB/s Write: 6500 MB/s Endurance: 600 TBW Warranty: 1 years Interface: M.2 4.0 x 4

Should you buy Lexar NQ790 2TB and another specs watch here.

Lexar NQ790 2TB NVMe SSD specifications

Controller & Memory

NQ790 (2TB) produced by Lexar works on Maxiotech MAP-1602A. The NVMe write a data location map on DRAM No to run a games faster. The NQ790 comes equipped with YMTC 128-LTLC memory. This drive is offered also in 1 TB and 4 TB capacities.

NQ790 Performance & Benchmarks

Internal SSD works on PCIe M.2 4.0 x 4 bus with maximum write speeds 6500 Mbps, and read speeds 7400 MB/s. This model has input/output performance 6500000 on writing and 7400000 on reading operations per second.

Performance comparison

Lexar NQ790 2 TB vs M.2 4.0 x 4 peers

Switch between sequential throughput and random IOPS to see how this drive stacks up against other M.2 4.0 x 4 SSDs in our database. The highlighted bar is the drive on this page — click any other bar to open that drive.

  • Patriot Viper PV593 1 TB: 14,500 MB/s read, 14,000 MB/s write
  • Patriot Viper PV593 2 TB: 14,500 MB/s read, 14,000 MB/s write
  • Patriot Viper PV593 4 TB: 14,500 MB/s read, 14,000 MB/s write
  • Patriot Viper PV573 2 TB: 14,000 MB/s read, 12,000 MB/s write
  • Lexar NQ790 2 TB (this drive): 7,400 MB/s read, 6,500 MB/s write

Lexar NQ790 vs Competitors

See how the NQ790 stacks up against other M.2 4.0 x 4 drives in our database:

Endurance, TBW & Warranty

Manufacturer give 1 years of warranty limited by endurance 600 TBW. The NQ790 has 2000000 million hours mean time between failure.

Lexar NQ790 2 TB Specifications

Category Value
Capacity [?] 2 TB
Interface [?] M.2 4.0 x 4
Controller [?] Maxiotech MAP-1602A
Memory type [?] YMTC 128-LTLC
DRAM [?] No
Read speed (MB/s) [?] 7400
Write speed (MB/s) [?] 6500
Read IOPS [?] 7400000
Write IOPS [?] 6500000
Endurance (TBW) [?] 600
MTBF (million hours) [?] 2000000
Warranty (years) [?] 1

Verdict: Is the NQ790 Worth It in 2026?

NQ790 (2TB) produced by Lexar support PCIe Gen4 that is significantly faster than previous bus standard. The sequential write speed is 6500 Mbps, that is faster than has most of competitors. The Internal SSD has endurance 600 TBW, that is not much against rivals. On balance, our editor strongly recommend to purchase Lexar NQ790 2TB for your PC.

+ Pros

  • Excellent writing speed
  • PCIe 4.0
  • Capacity

- Cons

  • Writing speed

4.4 / 5 · 66 votes

Buy this or similar SSD Storage:

Samsung 980 Pro 2 TB

-57% $165
List Price: $379.99

Buy on Amazon

Video Review

NEW BEST BUDGET SSD? | Lexar NM790 SSD review

Frequently Asked Questions

The Lexar NQ790 has No. DRAM in their controller help to improve endurance and IOPS.

The Lexar NQ790 due to the high density of memory chips you need to install of extra heat sink. It would decrease temperature of the memory chips and controller. Some motherboards or laptops already has thermal pads below or above the SSD to improve performance during high loads.

The NQ790 2TB has write speed 6500 Mb/s, sequential read speed 7400 Mb per second. Storage works on Maxiotech MAP-1602A controller and M.2 4.0 x 4 high-speed serial computer expansion bus standard. The NAND memory type is YMTC 128-LTLC.

Comments

  • Be the first to comment.

Comments are reviewed before they appear.