ADATA Legend 840 1Tb NVMe technical specs

Posted on February 05, 2024 by Raymond Chen

ADATA's Legend 840 NVMe SSD works on PCIe M.2 4.0 x 4 bus. More details about this NVMe SSD on this site.

ADATA Legend 840 1Tb NVMe technical specs

ADATA Legend 840 1Tb use Innogrit IG5220 controller. The Legend 840 comes equipped with 3D Nand flash memory. SSD besides, available in 512 Gb volume sizes.

🚀 Performance and benchmarks

Storage use PCIe M.2 4.0 x 4 expansion standard with read speeds 5000 Mbps, and sequential write speeds equals to 4500 MB/s. This model has IOPS 600000 on writing and 650000 on reading operations per second.

🖥️ Endurance and warranty

Manufacturer give 5 years warranty period limited by endurance 650 Total Bytes Written.

📊 Specs

Category Value
Capacity 1 Tb
Interface M.2 4.0 x 4
Controller Innogrit IG5220
Memory type 3D Nand
DRAM n/a
Read speed (Mb/s) 5000
Write speed (Mb/s) 4500
Read IOPS 650000
Write IOPS 600000
Endurance (TBW) 650
MTBF (million hours) n/a
Warranty (years) 5

Conclusion

Legend 840 (1Tb) produced by ADATA support PCIe 4.0 that is undoubtedly faster than previous bus standard. The write speed is 4500 Mb/s, that is common for this expansion standard. The ADATA Legend 840 provide possibility to write 650 TBW, that is not very much against nearest rivals. Overall, we advise to purchase ADATA Legend 840 1Tb for your PC.

+ Pros

  • Good writing speed
  • PCIe 4.0
  • Capacity

- Cons

  • Writing speed

🛒 Buy this or similar SSD Storage:

Samsung 980 Pro 2 Tb

-57% $165
List Price: $379.99

Buy on Amazon

✨ Video Review

The Most Affordable PCIE Gen4x4 SSD with 5,000MB/s Read Speed - ADATA Legend 840

⁉️ FAQ

The Legend 840 1Tb is DRAMless drive or information about it is unknown. DRAM makes SSD faster, but more expensive.

The ADATA Legend 840 due to the low density of memory chips may work without extra heat sinks. Some motherboards or laptops from the factory has additional cooling below or above the SSD to enhance productivity during times of high loads.

The ADATA Legend 840 1Tb has maximum write speed 4500 Mbps, sequential read speed 5000 Mb/s. It operate on Innogrit IG5220 controller and M.2 4.0 x 4 interface standard. The memory type is 3D Nand.
There are no comments yet.
Your message is required.